 |
Home | Services | Company | Order Tracking | Site Map |
 |
 |
||
|
Home | Services | Company | Order Tracking | Site Map |
|
|
|
||
 |
| Services Home Roll Label Chart Art Department UL & CSA Bin Stocking |
Almost all of our raw materials are UL approved. |
|||
| All of the following are approved for ABS plastic, aluminum, anodized aluminum,alkyd paint, galvanized steel. |
||||
| Additional materials that some labels are approved for include nylon, phenolic, polycarbonate, polyester paint, polystyrene, polyurethane paint, porcelain paint, stainless steel, epoxy, and a few others. |
||||
 |
Most MAXIMUM temperatures are 80 C (176 F) and range from 60 C (140 F) to 150 C (302 F). Most MINIMUM temperatures are -29 C (-29 F) with some at -40 C (-40 F) Link To UL All are Suitable where exposed to high humidity or occasional exposure to water. Some are suitable for exposure to lubricating oils. Except as noted, materials are .002" thick, laminates are .001" thick Mylar. |
|||
| We will work with you to get approval for other substrates or conditions. |
||||
| See our page at www.ul.com for full product details. |
||||
| Summary of UL (BN series) and CSA approvals. |
||||
| Printer receptive materials: |
||||
| BN-1 | 3M 7883 Matte Silver Mylar, Computer printable. No Lamination. | |||
| Indoors |
||||
| BN-6 & CSA |
Matte Silver Mylar, Computer printable. No Lamination. |
|||
| Flexcon Compucal II MM-200-S, MT/C329, L-23 Indoors |
||||
| BN-7 & CSA |
White Mylar, Computer printable. No Lamination | |||
| Flexcon Compucal II PM-200-W, MT/C329, L-23 Indoors |
||||
| .002 Matte Silver materials. |
||||
| BN-2 & CSA |
Matte Silver Mylar Hot stamp printed. | |||
| Gloss, Matte or Computer Printable Lamination (CPR) Flex Mark MM-200-SM, TC-200M, L-23 Indoors Also suitable for exposure to lubricating oils. |
||||
| BN-8 & CSA |
Chrome Mylar Gloss, Matte or Computer Printable Lamination (CPR) | |||
| Flexcon Classics Plus 22285 Indoors |
||||
| .002 White Mylar Materials |
||||
| BN-3 & CSA |
White Mylar Hot stamp printed for lower quantities. | |||
| Gloss, Matte or Computer Printable Lamination (CPR) Flex Mark PM-200-W, TC-200M, L-23 Indoors and Outdoors Also suitable for exposure to lubricating oils. |
||||
| BN-10 & CSA |
Same as BN-3 except Flexo printed for higher quantities. | |||
| Indoors only. |
||||
| Lexan (polycarbonate) |
||||
| BN-4A & CSA |
.005 to .020 GE 8B35 Lexan (polycarbonate) | |||
| Indoors. Also suitable for exposure to lubricating oils. |
||||
| Aluminum |
||||
| BN-5 | Anodized aluminum, .005 to .020, Epoxy Inks | |||
| Indoors. |
||||
| UL BN series are identified on the packaging per UL guidelines. | ||||
| UL 969 is the standard used to investigate UL PGDQ2 products. |
||||
| Our "BN" mark is added to each CSA label. | ||||
| CSA Class 7921, Type A (Heavy Duty), CAN/CSA-C22.1 No. 0.15-M90, the CSA standard for adhesive type labels. |
||||
 |
|
|||
|
1180 Page Ave. :: Fremont, California 94538 :: Phone 510-249-1350 :: Fax 510-249-1440
labels@bradleynp.com |
